Climate control, Operating the climate control systems – Mercedes-Benz S-Coupe 2015 User Manual
Page 139
Setting the airflow
General notes
You can select different airflow settings for
the driver's and front-passenger sides.
Setting the airflow
X
Turn the SmartKey to position 2 in the igni-
tion lock (
Y
page 147).
X
To increase/reduce: press the upper or
lower section of the K rocker switch.
or
X
Set the airflow using COMAND (see the
separate operating instructions).
Switching the synchronization func-
tion on/off
Climate control can be set centrally using the
synchronization function. The settings for
temperature, air distribution and airflow on
the driver's side are adopted for the front-
passenger side.
X
To activate/deactivate: switch the syn-
chronization function on or off using
COMAND (see the separate operating
instructions).
The synchronization function switches off, if
the settings for the front-passenger side are
changed.
Defrosting the windshield
You can use this function to defrost the wind-
shield or to clear a fogged up windshield or
front side windows on the inside.
Switch off the "Windshield defrosting" func-
tion as soon as the windshield is clear again.
X
Turn the SmartKey to position 2 in the igni-
tion lock (
Y
page 147).
X
To activate: press the ¬ rocker switch
on the front control unit up or down.
The indicator lamp in the ¬ rocker
switch lights up.
The climate control system switches to the
following functions:
R
high airflow
R
high temperature
R
air distribution to the windshield and
front side windows
R
air-recirculation mode off
R
windshield heating on
X
To deactivate: press the ¬ rocker
switch up or down.
The indicator lamp in the ¬ rocker
switch goes out. The previously selected
settings are restored. Air-recirculation
mode remains deactivated.
or
X
Press the à rocker switch up or down.
or
X
Use the t rocker switch to call up the
COMAND climate control menu.
Defrosting the windows
Windows fogged up on the inside
X
Activate the "Cooling with air dehumidifi-
cation" function with the Á rocker
switch.
or
X
Activate the "Cooling with air dehumidifi-
cation" function via COMAND (see the sep-
arate operating instructions).
X
Switch on automatic mode using the Ã
rocker switch.
X
If the windows continue to fog up, activate
the "Windshield defrosting" function using
the ¬ rocker switch. The windshield
heating is switched on.
i
You should only select this setting until
the windshield is clear again.
Operating the climate control systems
137
Climate
control