Driv ing and pa rki ng, Driving systems – Mercedes-Benz S-Coupe 2015 User Manual

Page 191

Advertising
background image

Activating the HOLD function

X

Make sure that the activation conditions

are met.

X

Depress the brake pedal.

X

Quickly depress the brake pedal further

until : appears in the multifunction dis-

play.

The HOLD function is activated. You can

release the brake pedal.

i

If depressing the brake pedal the first

time does not activate the HOLD function,

wait briefly and then try again.

Deactivating the HOLD function

The HOLD function is deactivated automati-

cally if:

R

you accelerate and the transmission is in

position D or R.

R

you shift the transmission to position P.

R

you depress the brake pedal again with a

certain amount of pressure until ë dis-

appears from the multifunction display.

R

you secure the vehicle using the electric

parking brake.

R

you activate DISTRONIC PLUS.

i

After a time, the electric parking brake

secures the vehicle and relieves the service

brake. The HOLD function is then deacti-

vated.

When the HOLD function is activated, the

transmission is shifted automatically to posi-

tion P if:

R

the driver's seat belt is not fastened and the

driver's door is open

R

the engine is switched off, unless it is auto-

matically switched off by the ECO start/

stop function

The electric parking brake secures the vehicle

automatically if DISTRONIC PLUS is activated

when the vehicle is stationary and:

R

a system malfunction occurs.

R

the power supply is not sufficient.

If a malfunction in the electric parking brake

occurs, then the transmission may also be

shifted into position P automatically.

Magic Body Control

General notes

MAGIC BODY CONTROL consists of Active

Body Control (ABC), ROAD SURFACE SCAN,

the CURVE cornering function as well as auto-

matic vehicle stabilization in the event of a

crosswind.
Your vehicle automatically adjusts its ride

height to reduce fuel consumption. The sus-

pension mode is adjusted according to your

selection (SPORT, COMFORT or CURVE), the

road surface conditions and the vehicle load.

A multifunction camera detects bumps in the

road surface before the vehicle drives over

them. This reduces chassis movements.

Important safety notes

G

WARNING

When the vehicle is being lowered, people

could become trapped if their limbs are

between the vehicle body and the wheels or

underneath the vehicle. There is a risk of

injury.

Driving systems

189

Driv

ing

and

pa

rki

ng

Z

Advertising