On-board computer and displays, Menus and submenus – Mercedes-Benz S-Coupe 2015 User Manual
Page 244
Graphic
Graphic
menu in the multifunction display
when the ignition is on.
For further information about ATTENTION
ASSIST, see (
Y
page 211).
Activating/deactivating Active Lane
Keeping Assist
X
Use ò on the steering wheel to call up
the list of menus.
X
Press the : or 9 button on the steer-
ing wheel to select the
Settings
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the
DriveAs‐
DriveAs‐
sist
sist
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select
Lane Keeping Assist
Lane Keeping Assist
.
X
Press a to confirm.
The current selection
Standard
Standard
or
Adap‐
Adap‐
tive
tive
is displayed.
X
To change the setting: press a again.
For further information about Active Lane
Keeping Assist, see (
Y
page 220).
Head-up display submenu
Switching other displays on/off
You can switch the display of additional infor-
mation on and off in the on-board computer. If
the head-up display (
Y
page 229) is activated,
this will be shown on the windshield.
X
Use ò on the steering wheel to call up
the list of menus.
X
Press the : or 9 button on the steer-
ing wheel to select the
Settings
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press the : or 9 button to select the
Head-up Display
Head-up Display
submenu.
X
Press a to confirm.
X
Press the : or 9 buttons to select
Display Content
Display Content
.
X
Press a to confirm.
Switching the navigation messages dis-
play on/off
X
Press the a button to save the setting.
When you switch on the
Navigation
Navigation Mes‐
Mes‐
sages
sages
display, navigation messages are
shown on the windshield when the head-up
display is activated.
Further information on navigation (see the
separate operating instructions).
Setting the position
You can adjust the position of the head-up
display. This allows you to compensate for
differences in the seat position.
X
Switch on the Head-up display
(
Y
page 229).
X
Use ò on the steering wheel to call up
the list of menus.
X
Press the : or 9 button on the steer-
ing wheel to select the
Settings
Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Use the : or 9 button to select the
Head-up Display
Head-up Display
submenu.
X
Press a to confirm.
X
Use the : or 9 button to select the
Position
Position
function.
X
Press the a button to save the setting.
X
Press the : or 9 button to set the
position from
Level
Level +5
+5
(high) to
Level
Level -5
-5
(low).
X
Press the a or % button to save the
setting.
Using the Memory function, you can save and
call up the position of the Head-up display as
a single memory preset (
Y
page 116).
Setting the brightness
The brightness of the head-up display is auto-
matically adjusted to the surrounding ambi-
ent light. You can also individually adjust the
brightness of the head-up display.
242
Menus and submenus
On-board
computer
and
displays