SINGER 15-30 Treadle Sewing Machine - Manual (Page 10)

Table of Contents Previous Page | Next Page
Sewing Machine No. 15
10
To Replace the Bobbin Case
After threading, take the bobbin case by the latch, holding it between the thumb and
forefinger of the left hand. Place the bobbin case on the centre stud (1, Fig. 4) of the shuttle
body with the position finger (1, Fig. 10) opposite the notch at the top of the shuttle race,
release the latch and press the bobbin case back until the latch catches the groove near the
end of the stud. Allow the thread to hang free and close the slide in the bed of the machine.
FIG. 10. BOBBIN CASE THREADED AND REPLACED