Foot hemmer -- hemming and, Sewing on lace, Sewing machine no. 15 – SINGER 15-30 Treadle Sewing Machine User Manual

Page 19

Advertising
background image

Table of Contents

Previous Page | Next Page

Sewing Machine No. 15

19

FOOT HEMMER - Hemming and Sewing on Lace

Start the hem as previously explained, and when it is well started, raise the needle to its
highest point. Raise the hemmer to relieve its pressure on the hem, pass the end of the lace
through the slot in the side of the hemmer, under the back of the hemmer and over the hem,
as shown in Fig. 19.

Take care that the hem is not displaced in the hemmer and that the needle goes down
through the lace and hem together. Then let down the presser bar and guide the lace over
the front of the hemmer, keeping it well into the slot.

FIG. 19

Advertising
This manual is related to the following products: