To ruffle and sew on a, Facing in one operation, Sewing machine no. 15 – SINGER 15-30 Treadle Sewing Machine User Manual

Page 33

Advertising
background image

Table of Contents

Previous Page | Next Page

Sewing Machine No. 15

33

Piping a Ruffle

Insert the material to be ruffled between the two blue blades, following the line 2, in Fig. 26. T h i s
material must not be over 1 1/4 inches wide, it is carried through the ruffler with the
finished edge of the ruffle to the right of the attachment as shown in Fig. 30.

The material for piping must measure about 1/4 inch wide when folded in the centre and is usually
cut on the bias. Place the piping material in the ruff l e r, following the line 4, in Fig. 26, with the folded
edge of the piping to the right. The material to which the piping and ruffling are to be sewn should
be folded on the edge and inserted in the ruffler following the line 5, in Fig. 26.

FIG. 30

Advertising
This manual is related to the following products: