SINGER 15-30 Treadle Sewing Machine - Manual (Page 29)

Table of Contents Previous Page | Next Page
Sewing Machine No. 15
29
To Attach the Ruffler to the Machine
Raise the needle bar to its highest point and remove the presser foot. Attach the presser foot
(A, Fig. 26) to the presser bar by means of the thumb screw, at the same time placing the
fork arm
(B. Fig. 26) astride the needle clamp as shown in Fig. 27.
To Adjust the Ruffler for Gathering
The adjusting finger (F. Fig 27) is not intended for gathering and should be moved forward or
away from the needle, shown Fig. 27.
FIG. 27