SINGER 15-30 Treadle Sewing Machine - Manual (Page 32)

Table of Contents Previous Page | Next Page
Sewing Machine No. 15
32
To Ruffle and Sew on a Facing in One Operation
Insert the material to be ruffled between the two blue blades, following the line 2, in Fig. 26.
Place the garment to which the ruffle is to be attached, under the separator blade, following
the line 1, in Fig. 26. Place the material for the facing over the upper blue blade, as shown in
Fig. 29, following the line 3, in Fig. 26. The facing may be straight or bias material. If the fac-
ing is to be on the right side of the garment, place the garment and the ruffle so that the
wrong sides are together. If the facing is to be on the wrong side, place the right sides of the
garment and the ruffle together.
FIG. 29