SINGER 15-30 Treadle Sewing Machine - Manual (Page 35)

Table of Contents Previous Page | Next Page
Sewing Machine No. 15
35
To Adjust the Ruffler for Group Plaiting and Gathering
The ruffler can be adjusted for group plaiting by lifting the adjusting lever (E, Fig. 32) and
moving it to the right so that the top of the projection (D, Fig. 32) enters the small slot
indicated by the star on the adjusting lever. This should be done at the points where you wish
to make the space between the plaits. The ruffler will then stop and plain stitching will be
made. When the desired space has been made, adjust the lever (E) so that the projection
(D) enters either the slot marked "6" or the slot marked "12". By alternately making groups of
plaits and plain spaces, as shown in Fig. 32, very attractive work can be produced.
FIG. 32