SINGER 15-30 Treadle Sewing Machine - Manual (Page 25)

Table of Contents Previous Page | Next Page
Sewing Machine No. 15
25
TUCKER
Remove the presser foot and attach the tucker in its place. The width of the tuck is
determined by the scale of figures nearest the needle, which shows in eighths and sixteenths
of an inch the distance of the edge of the fold from the line of stitching.
The crease or mark for the second and following tucks is determined by the scale nearest the
operator and this is set by the line in front of the needle hole in the presser foot. For blind
tucks without spaces, adjust the scale nearest the operator so that the figure opposite the line
on the presser foot will be the same as that at which the guide is located on the scale nearest
the needle. To make spaces between the tucks, move the front scale farther to the left until
the desired space is obtained.
FIG. 25