Vinten Radamec HDVRC - Manual (Page 20)

18 VRC System Operators Guide
Calibrating the touch-screen
All VRC system monitors are touch-screen enabled, allowing on-screen options to be selected by
touching the relevant graphic with a finger. It is also possible to select on-screen options using the
left mouse button. The touch-screen user interface closely resembles the Radamec TCPi system, and
can control multiple camera units.
The location that you touch and the “button” on the screen are physically separated by the thickness
of the touch screen glass. Therefore, depending on how you sit and your angle of view, the touch
screen may need recalibration. If you find that the on-screen pointer no longer matches the position
of your finger on the screen you should recalibrate.
Sit in a natural position that you will normally adopt whilst operating the touch-screen monitor.
Double click on Monitor Control Panel icon on the desktop and follow the on screen prompts.
NOTE: Refer to the User documentation supplied with the touch-screen for
information on regular maintenance, cleaning and setup instructions.