Vinten Radamec HDVRC - Manual (Page 34)

32 VRC System Operators Guide
Editing the shot time
The time of the shot within the sequence can be edited by
selecting the shot and then selecting EDIT TIME. The
New Sequence Shot... dialog appears (Figure 14).
Enter the new time for the shot using the keypad and then
select ENTER.
Selecting DELETE will delete the last digit entered.
Select ENTER to save the new shot time and return to the
Sequence window.
When the time of a shot is edited, the total time of the
sequence, displayed in the Sequence window changes.
Focus
When on Shot (thumbnail coloured dark blue), selecting FOCUS lets you adjust the
camera lens focal point (position). The lens will zoom to full focal length onto the
subject, allowing you to adjust the focus using the Focus knob on the control panel
and adjust the pan and tilt settings.
The Focus menu provides options to save the new focus position (KEEP SHOT) or return to the
original saved lens position (KEEP CAMERA).
Keep Shot
When the focus has been adjusted, selecting KEEP SHOT will save the camera lens focus position
whilst returning the camera to its original shot position, with the original pan and tilt settings.
Keep Camera
When the focus has been adjusted, selecting KEEP CAMERA will return the camera to its original
position, with the original pan and tilt settings and original lens focus position. The adjusted focus
setting will not be saved.
Page up/Page down
The shots in a show can be positioned on multiple pages depending on
the grid size. Use the Page up and Page down buttons to scroll through
the pages.
Figure 14 Edit time dialog