Vinten Radamec HDVRC - Manual (Page 61)

Publication Part No. V4009-4980 Issue 3.1 59
Panel options for pedestals
The following options only affect the operation of the RP2A pedestal.
Always override
If ALWAYS OVERRIDE is On, the OVERRIDE button on the joystick control panel will be On
after user login. The selected Radamec RP2A pedestal will continue moving at quarter speed after
detection of an infrared proximity warning or a collision with an obstacle (see Bumper disable on
page 23).
Always disable IR
If ALWAYS DISBLE IR is On, the INFRARED DISABLE button on the joystick control panel will
be On after user login (see Infrared disable on page 24). The infrared proximity protection (which
stops pedestal movement before contact with an obstacle) is Off for all Radamec RP2A pedestals
in the system.
The following option affects the operation of the SP-2000 and RP2A pedestals:
Always disable bumpers
If ALWAYS DISABLE BUMPERS is On, the BUMPER DISABLE button on the control panel will
be On after user login (see Bumper disable on page 23). The bumper protection feature (which
stops pedestal movement after a collision with an obstacle) is Off for all Radamec RP2A pedestals
in the system.
WARNING!
Risk of personal injury or damage to equipment when these functions
are activated. Activating these functions will allow pedestals to be used
in close proximity.
WARNING!
1. The ALWAYS OVERRIDE function will have no effect on
Radamec RP2A pedestal proximity detection, if the Infrared
Disable button on the control panel is On.
2. The ALWAYS OVERRIDE Radamec RP2A pedestal function will
have no effect on collision with an obstacle, if the Bumper
Disable button on the control panel is On.