Vinten Radamec HDVRC User Manual
Page 44
42
VRC System Operators Guide
To add shots:
1.
Make sure that the morning show with its target (home) shots is loaded.
2.
Select MENU>CONFIGURATION and make sure that Require Shot Name is On and Require Shot
Time is Off. Select RETURN.
3.
Select camera #1 on the touch-screen or the control panel.
4.
Use the joysticks to move the camera into position for the first shot, and then frame and focus the
shot.
5.
Select STORE on the touch-screen and select a position on the editing pane to store the shot.
6.
Type in a name (e.g. OPEN) and select >ENTER.
7.
The shot will be saved with the default fade time and its thumbnail displayed on the editing pane.
8.
Repeat steps 4 through 7 for the remaining shots on camera #1.
9.
Select camera #2 on the touch screen or the control panel and repeat steps 4 through 7 for the
required shots on camera #2.
10. Select camera #3 on the touch screen or the control panel and repeat steps 4 through 7 for the
required shots on camera #3.
After adding these shots your workspace will look something like that shown in Figure 21.
NOTE:
The video signal for the selected camera can be viewed on the
preview monitor.