Vinten Radamec HDVRC - Manual (Page 26)

24 VRC System Operators Guide
Backup link
The Backup Link button gives priority control to the control panel in the unlikely event of the VRC
system failing. This allows the robotic camera units to remain in operation.
Infrared disable
Where fitted, the infrared disable button turns off the selected Radamec RP2A pedestal infrared
proximity protection (which arrests pedestal travel before contact with an obstacle).
WARNING!
Risk of personal injury or damage to equipment when the Bumper
Disable button is depressed. The Override function will have no effect
on the RP2A pedestal proximity detection.
NOTE: If ALWAYS DISBLE IR is selected in the Configuration Screen
(see Always disable IR on page 69), the control panel will have
the INFRARED DISABLE function activated by default.