Sp-2000 pedestal – Vinten Radamec HDVRC User Manual
Page 38
Advertising
36
VRC System Operators Guide
SP-2000 pedestal
1.
Select the camera to be targeted on the touch-screen or the control panel.
2.
Use the XY/Height joystick on the control panel to position the pedestal so that it is positioned over
the target as shown in Figure 18.
3.
Select OPTS>TARGET.
4.
Select the relevant target from the list and select OK. The SP-2000 pedestal will reposition and align
itself to the target. When the pedestal stops moving a popup window will confirm that targeting was
completed successful.
Figure 17 Fusion Pedestal correct position after targeting
FP-145 MKI pedestal
3 line floor target
FP-145 MKII pedestal
L shaped floor target
Advertising