Vinten Radamec HDVRC - Manual (Page 31)

Publication Part No. V4009-4980 Issue 3.1 29
Fade
After a shot is selected on the touch-screen you can fade from the current position to
the selected shot. Using Fade, the duration of the transition is set by the stored time in
the shot. However, if the shot cannot be reached within the stored time, the transition
is as fast as possible. In addition, the fade time can be modified in real-time using the
Fade Time bar on the control panel (see Fade time control on page 46).
Latched Fade
Use Latched Fade if you want to immediately fade to a shot when you select it on the touch- screen.
In the normal Fade mode you cue the shot by selecting it on the touch screen and then initiate the
move by selecting Fade.
1. Make sure that no shots are currently cued (no shot thumbnails have a green
background).
2. Select FADE on the touch-screen - the button turns red to denote Latched Fade mode.
3. Check that the operating area around the cameras is clear.
4. Select a shot on the touch-screen. The thumbnail immediately turns red and the camera
moves to the selected shot.
5. Select other shots as required. In each case the thumbnail immediately turns red and the
camera moves to the selected shot.
6. Select Fade on the touch-screen to return to the normal Fade mode.
Fade or Cut multiple shots
If you select shots on more than one camera and then select Fade or Cut, all of the cameras will start
moving at the same time. Before initiating a multi-camera move make sure that the area around all
of the relevant cameras is clear and that the cameras will not collide with each other.
Store
When a camera is positioned as required, the shot position can be saved in a show for
later use (see Adding shots to a show on page 41).