Vinten Radamec HDVRC - Manual (Page 62)

60 VRC System Operators Guide
Camera control
Shot options
Information that is required and displayed for each saved shot is user selectable.
Table 4: Camera Control option settings
Option ON OFF
Deselect A camera that has been selected can be
deselected by touching it on the touch
screen. A camera can only be deselected by select-
ing a different camera.
Always take rudely Selecting a camera at one controller will
immediately take control away from a sec-
ond controller that may have been using the
camera. A dialog appears requesting you to confirm
that you want to take control of the camera
from the other controller.
Table 5: Shot option settings
Option ON OFF
Display Shot Name The name of each shot is superimposed on
the shot thumbnail. The shot name is not displayed.
Require Shot Name You will be prompted to type in a name
when you store a new shot. This is the most
common mode of operation. The system will automatically assign a
number to each saved shot. This can save
time but the shot names are no longer
descriptive.
Display shot time The time of each shot is superimposed on
the shot thumbnail. The time is not displayed.
Require shot time You will be prompted to enter a time when
you store a shot. The default shot time will be used for each
stored shot. This is the most common mode
of operation since it is faster than entering
times each time you store a new shot.