Vinten Radamec HDVRC - Manual (Page 33)

Publication Part No. V4009-4980 Issue 3.1 31
workspace. Options provided allow you to play the sequence, edit the time of the shot and delete shots
from the sequence.
A sequence of shots is created by dragging the required shots from the editing pane on the workspace
into the editing pane in the Sequence window. It is preferable to place the shots into the editing pane
in the required order because shots cannot be rearranged once inserted. When you have inserted all
of the shots, you can run through the sequence by selecting the PLAY option.
When the sequence is complete, select EXIT to save the sequence and return to the workspace. When
a sequence has been created, ‘Seq’ appears in the top right corner of the thumbnail. When the
sequence is playing, the thumbnail is coloured purple. The sequence can be edited using the options
from the EDIT Menu (see Edit menu on page 46).
A sequence can be used anywhere within the show. When one sequence follows another in the show,
it is important that you do not start the next sequence prior to completing the first sequence. If you
do want to start the next sequence before the first sequence has finished, you must stop the first
sequence using the STOP button before starting the next sequence.
Deleting a Shot from the sequence
To delete a shot from the sequence, select the shot and then select DELETE. The shot is deleted
from the sequence but is not deleted from the editing pane on the workspace.
Figure 13 Sequence window
CAUTION! Ensure that the area is clear of persons or potential hazards before
you select the Play option. The Play option will physically move the
camera, pedestal and head, following the predefined movements
(shots) in the sequence.