Latched time, Name, Time – Vinten Radamec HDVRC User Manual
Page 50: Delete
48
VRC System Operators Guide
Latched time
Use Latched Time when you want to modify the time of several shots. The normal Time mode
modifies a single shot and then returns you to the workspace. Latched Time keeps you in the Edit
menu after each shot is modified.
1.
Select LATCHED TIME.
2.
Select a shot and modify its time.
3.
Select another shot and modify its time.
4.
Repeat until all of the desired shots have been modified.
5.
Select LATCHED TIME to exit the mode and select RETURN to go back to the workspace.
Name
To edit a shot name:
1.
Select EDIT.
2.
Select the desired shot from the grid display.
3.
Select NAME.
4.
Type in the desired shot name and select ENTER (on the touch-screen or the keyboard) to return to
the workspace.
Time
To modify the time of a shot:
1.
Select EDIT
2.
Select the desired shot from the grid display.
3.
Select TIME.
4.
Type in the desired shot time (in seconds) and select ENTER to return to the workspace.
Delete
To delete a single shot:
1.
Select EDIT
2.
Select the desired shot from the grid display.
3.
Select DELETE and YES to delete the shot and return to the workspace.
NOTE:
The shot name can be a maximum of 16 characters long.