Vinten Radamec HDVRC - Manual (Page 55)

Publication Part No. V4009-4980 Issue 3.1 53
its thumbnail will be light blue and you will usually replace it (select STORE and select the shot) and
the thumbnail will turn dark blue. This ensures that the shot will be correctly framed for the rest of
the current show.
Tracking
When a shot is on air you can track the talent if they shift in the frame, slide behind an over the
shoulder box etc. Select the on-air camera at the control panel and track the shot as needed.
Sample news show rundown
TALENT SLUG DIRECTOR
NOTES
VRC OPERATOR ACTIONS
Select OPEN on Cam#1 and CUT to it
Select 2-SHOT on Cam#2 and CUT to it
Trim and RESAVE if needed
Select LIZ TIGHT on Cam#3 and CUT to it
Trim and RESAVE if needed
ANIMATION OPEN 1-OPEN Select 3SHOT WX on Cam#1
FRED HEADLINE 1 2-2SHOT Select CUT on Cam#1
Check Cam#2 framing, track if needed
LIZ HEADLINE 2 2-2SHOT When Cam#1 is at 3SHOT WX (dark blue)
Trim and RESAVE if needed
Select 3SHOT WX END on Cam#1
FRED WEATHER CHIT
CHAT 1-PUSH 3-SHOT WX Select FADE on Cam#1
Check Cam#1 framing, track if needed
Select ANCHOR KEY on Cam#2, CUT to it
MEGAN STORMS STORMTRACKER
GRAPHICS Select FRED KEY on Cam#1, CUT to it
Trim and RESAVE if needed
LIZ CONSTRUCTION 3-LIZ TIGHT Check Cam#3 framing, track if needed
Select LIZ KEY on Cam#3
LIZ PAN 3-LIZ KEY
GRAPHICS MAP Select FADE on Cam#3
Check Cam#3 framing, track if needed
FRED BUDGET 1-FRED KEY
B ROLL INSERT Check Cam#1 framing, track if necessary
Select Cam#2, trim and RESAVE if needed
LIZ PARKING 2-LIZ KEY
LIVE REMOTE 2 Check Cam#2 framing, track if needed
REBECCA PARKING LIVE REMOTE 2 Select FRED TIGHT on Cam#1, CUT to it
Select 2 SHOT on Cam#2, CUT to it
Select Cam#1, trim and RESAVE if needed
Select Cam#2, trim and RESAVE if needed