Instructions to reset high pressure switch – Wine Guardian Ducted Split Wine Cellar Cooling Systems (WGS175) - Manual User Manual

Page 73

Advertising
background image

75

High Pitched or Loud Rubbing Noise, Clanking or Vibration


Possible Cause Solution
Fans loose or malfunctioning Repair or replace
Excessive compressor vibration Replace
TXV malfunctioning Repair or replace

Replacing the Blowers

When replacing the fan or motor, replace the fan and motor as a unit. Do not
remove the motor from the impeller wheel.


Instructions to Reset High Pressure Switch

1. Remove the top and side access panels at the condensing unit

2. Locate the high pressure switch near the compressor

3. Push in the reset button until it locks into position.

4. Re-install top and side access panels
























# 3

Advertising