CANOGA PERKINS 9175 Configuration Guide User Manual
Page 134
CanogaOS Configuration Guide
21-3
Validation Commands
To display the track interface linkstate configuration, use the show track privileged EXEC
command.
DUT#show track
Track 2
Type : Interface Linkstate
Interface : eth-0-2
State : down
Delay up : 30 seconds
Delay down : 30 seconds
21.2.3 Configuring
the
track rtr reachability
Beginning in privileged EXEC mode, follow these steps to configure the track rtr
reachability:
Command Description
DUT#configure terminal
Enter the Configure mode.
DUT(config)# track 1 rtr 1 reachability
Create a track object and track the state of an ip sla
entry.When the state of ip sla entry is OK or Overthreshold,
track object state is up; otherwise track object state is down.
DUT(config-track)# delay up 30
(Optional)Configure the track object parameters to specify a
period of time (in seconds) to delay when object state is
turned from down to up.
DUT(config-track)# delay down 30
(Optional)Configure the track object parameters to specify a
period of time (in seconds) to delay when object state is
turned from up to down.
DUT(config-track)#exit
Exit the track mode.
DUT(config)#exit
Exit the Configure mode.
Validation Commands
To display the track rtr reachability configuration, use the show track privileged EXEC
command.
DUT#show track
Track 1
Type : Response Time Reporter(RTR) Reachability
RTR entry number : 1
State : up
Delay up : 30 seconds
Delay down : 30 seconds
21.2.4 Configuring the track rtr state
Beginning in privileged EXEC mode, follow these steps to configure the track rtr state:
Command Description
DUT#configure terminal
Enter the Configure mode.
DUT(config)# track 1 rtr 1 state
Create a track object and track the state of an
ip sla entry.
When the state of ip sla entry is OK , track
object state is up; otherwise track object state