Document Outline

• Table of Contents
  • CAUTION!
  • BEMÆRK!
  • VAROITUSI
• Caution for AC mains iead
  • (“EB” area code model only)
  • CAUTION!
  • IMPORTANT
  • Before use
  • How to replace the fuse
• Suggestions for Safety
  • ■ Use a standard AC wall outlet
  • ■ Grasp the plug when disconnecting the power supply cord
  • ■ Place the unit where it will be well ventilated
  • ■ Be sure to place the unit on a fiat, level surface.
  • ■ Never attempt to repair nor reconstruct this unit
  • ■ Take particular care if children are present
  • ■ If water is spilled on the unit
  • ■ Avoid spray-type insecticides
  • ■ Never use alcohol or paint thinner
  • ■ Disconnect the power supply cord if the unit will not be used for a long time
  • ■ If trouble occurs
• Before Use
• Concerning the Remote Control
  • I Battery installation
    • 2 Insert the batteries included with this system.
    • 3 Close the cover.
  • Use of batteries
  • Operation notes
  • Supplied accessories
    • Check the packing carton for these accessories.
  • stacking the components
    • ■ System layout
  • Connections
  • LUOKAN 1 LASERLAITE KLASS1 LASER APPARAT
    • 1 Connect the FM indoor antenna.
    • 2 Connect the LW/MW loop antenna.
    • Connect the AC power supply cord after you have connected all other cables and cords.
    • M Optional antenna connections FM outdoor antenna (not included)
    • LW/MW outdoor antenna (not included)
    • ■ External unit connection Analog player
    • Surround speakers
    • ■ “REC OUT" terminal
  • Tuner section
    • ® Timer play button (PLAY TIMER)
    • 0 Cancel button (CANCEL)
    • 0 Set button (SET)
    • 0 Sleep timer button (SLEEP)
    • (§) Compact disc edit-recording mode select button (CD EDIT)
    • 0 Band select button (-BAND, -ALLOCATION)
  • Display section
    • ® Alphanumeric display
    • ® Tape Side indicator (SIDE A, B)
    • (continued)
  • Amplifier section
    • ® Power “STANDBY ci)/ON” switch (POWER, STANDBY ([)/ON)
    • 0 Equalizer mode select button (-EQ MODE, -FIXED/USER)
    • 0 Volume level control (VOLUME)
    • ® Remote control signal sensor (SENSOR)
    • 0 V. bass button (V. BASS)
    • 0 Equalizer ON/FLAT button (EQ, -ON/FLAT, -DEMO)
    • 0 Input select buttons
    • (PHONO, TAPE, CD, TUNER)
  • Display section
    • Equalizer flat indicator (EQ FLAT)
    • Fixed indicator (FIXED)
    • V. Bass indicator (V. BASS)
    • KARAOKE indicator (KARAOKE)
  • Cassette deck section
  • Compact disc player section
    • @ Disc tray
    • 0 Stop button (□)
    • 0 Play button (>)
    • 1 Press the band-select button to select FM, LW or MW.
    • 2 Turn the jog dial to tune in the desired broadcast.
    • ■ MW allocation settings
    • ■ About one touch tuning
    • (continued)
  • Memory presetting
    • 1 Press the band-select button to select FM, LW or MW.
    • 2 Press TUNING to select the MANUAL tuning mode.
    • 0Tune In your favorite station using the jog dial.
    • @ Press SET.
    • Repeat steps 3 through 4 to memorize a station in each of the remaining preset channels.
    • ■ From the main unit
    • 1 Press the band-select button to select FM, LW or MW.
    • 2 Press TUNING to select PRESET.
    • 3 Turn the jog dial to select the desired preset channel number.
    • S If noise is excessive in the FM mode Press FM MODE/B.P to monaural position.
    • ■ From the remote control
    • 1 Press TUNER/BAND to select FM, LW or MW.
    • 2 Press the numeric button corresponding to the preset channel you wish to tune in.
  • Sequential play
    • 1 Press the CD input select button.
    • 2 Press OPEN/CLOSE to open the disc tray, insert the disc with label facing up.
    • 3 Press OPEN/CLOSE to close the disc tray.
    • Press the CD play button.
    • ■ To temporarily stop the disc play
    • Press the pause button.
    • ■ To stop the disc play
    • Press the stop button.
  • Program play
    • ■ From the main unit
    • 1 Press the CD input select button.
    • 2 0Turn the jog dial to select the track you
    • 0 Press SET.
    • 4 Press the CD play button.
    • ■ Program memory function
    • Repeat step 2 for each track you wish to program in sequence.
    • ■ From the remote control
    • 1 Press the CD input select button.
    • 2 Press PROGRAM.
    • 3 Press the numeric buttons to select the track numbers.
    • 4 Repeat step 3 until you have completed the program.
    • 5 Press the CD play button.
  • Program play (continued)
    • ■ To confirm the program
    • While In stop mode, press the skip/search button.
    • ■ To add the entry
    • ■ To cancel program play
  • Direct access play
    • ■ From the remote control
    • 1 Press the CD input select button.
    • 2 Press a numeric button to select the desired track number.
    • ■ From the main unit
    • 1 Press the CD input select button.
    • 2 Turn the jog dial to select the track where you want to begin play.
    • 3 Press the play button.
  • Special features
    • ■ Random play
    • Press RANDOM on the remote control while player is in the stop mode.
    • ■ Repeat function
    • ■ To cancel repeat play
    • Press REPEAT once again.
    • ■ Skip function
    • While in play mode, press or
    • ■ Search function
  • To play back prerecorded cassettes
    • 1 Press the TAPE input select button.
    • 2 Press EJECT, and then Insert the cassette you wish to play.
    • 3 Press REVERSE MODE,
    • 5 Press one of the play buttons to start playback.
    • ■ To stop playback
    • Press the stop button.
    • ■ Full auto-stop
    • ■ About the Dolby Noise Reduction system
    • ■ About one touch play back
  • Listening to two tapes consecutively
    • 1 Press the TAPE input seiect button.
    • 2 Load cassettes in decks 1 and 2.
    • 3 Press REVERSE MODE to set the mode.
    • 5 Press DECK 1/2 to seiect deck 1.
    • 6 Press the forward-side piayback (>) button to start piayback.
    • ■ To stop the tape midway Press the stop button.
  • To fast forward or rewind the tape
  • To record from the radio or external source
    • Switch on the power.
    • 1 Press the deck 2 eject button to load a cassette in deck 2.
    • 3 Press REVERSE MODE to select the reverse mode you want to use.
    • ■ When you record from the compact discs
    • After pressing REC PAUSE;
    • ■ To briefly interrupt recording
    • Press REC PAUSE.
    • ■ To stop recording
    • Press the cassette deck stop button.
    • ■ To erase a recorded tape (Deck 2)
    • ■ To record with desired tone
    • ■ To use the beat proof function Press FM MODE/B.P on the tuner section.
  • Sequential CD recording (ALBUM)
    • Switch on the power.
    • 1 Press the CD input select button.
    • 2 Press OPEN/CLOSE on the CD player to load a disc.
    • 3 Press CD EDIT.
    • 4 0Turn the jog dial to select ALBUM.
    • 5 Load a cassette in deck 2.
    • 6 Press DOLBY NR when making a Dolby NR recording.
    • 7 Press REVERSE MODE to select the “ "
    • 8 0 Turn the jog dial to specify the length of the
    • Press SET.
    • 9 Press the CD play button for automatic recording.
    • ■ About Automatic Tape Level Setting (ATLS)
    • Press the CD stop button twice.
    • ■ To record with straight sound tone
    • ■ To record with desired tone
    • (continued)
  • Tape length priority recording (FIT)
    • 1 Press the deck 2 eject button to load a cassette in deck 2.
    • 2 Press DOLBY NR when making a Dolby NR recording.
    • 3 Press REVERSE MODE to select the “ ”
    • 4 Press the CD input select button.
    • 5 Press OPEN/CLOSE on the CD player to load a disc.
    • 6 Press CD EDIT.
    • 7 0 Turn the jog dial to select FIT.
    • (D Press SET.
    • Press the CD stop button twice.
    • You can confirm the play sequence on the display by pressing the skip/search button in the stop mode.
    • (continued)
  • Program edit-recording (PROGRAM)
    • 1 Press the deck 2 eject button to load a cassette in deck 2.
    • 2 Press DOLBY NR when making a Dolby NR recording.
    • 4 Press the CD input select button.
    • 5 Press OPEN/CLOSE on the CD player to load a disc.
    • 6 Press CD EDIT.
    • 7 (T) Turn the jog dial to select PROGRAM.
    • 8 0 Turn the jog dial to select the length of the tape you are using.
    • ■ To confirm the play sequence
    • You can confirm the play sequence on the display by pressing the skip/search button in the stop mode.
    • (continued)
  • To record from another disc on the remaining blank portion of the tape (LINK)
    • 1 Press OPEN/CLOSE to replace the disc.
    • 2 Press CD EDIT.
    • 0Turn the jog dial to select the desired editing mode.
    • Press SET.
    • 4 Press the CD play button for automatic recording.
    • 5 If you record from more discs, follow the above procedure.
    • ■ To cancel the link-edit recording
    • Press the stop button in the deck section.
    • 1 Press the TAPE input select button.
    • 3 Select the desired reverse mode.
    • Press one of the one<touch tape edit buttons (NORMAL or HIGH) to select editing speed.
    • ■ To stop the tape-to-tape-recording
    • ■ To record another tape on the remaining blank tape
• Changing the Tone
  • To retrieve the equalization curves preprogrammed to this system
    • While playing the desired source.
    • 1 Press -EQ MODE-FIXED/USER momentarily to select the desired equalization curve.
    • Press and hold -EQ MODE -FIXED/USER to select FIXED.
    • To cancel the equalization curves
  • About equalization curves preprogrammed to this unit
    • 2 CLEAR
    • g] H.P.ST
    • ^ CAR ST
  • To change the equalization curve continuously (Demonstration function)
    • While playing the desired source.
  • To store a desired equalization curves (USER curve)
    • 1 Press -EQ MODE-FIXED/USER momentarily to seiect the desired equaiization curve.
    • Press one of EQ LEVEL to adjust the equalization effect.
    • While playing the desired source. Press SURROUND to ON.
    • ■ To cancel the SURROUND effect Press SURROUND once again.
    • 1 Press CLOCK/TIMER.
    • 2 0 Turn the jog dial to select P-TIMER.
    • 0 Turn the jog dial to select the hour you wish timer play to begin. In this case, set it on 7.
    • (D Press SET.
    • 0 Press VOL. PRESET to set the volume level for timer play.
    • (2) Adjust the volume level using the volume level control.
    • (3) Press VOL. PRESET again.
    • 6 Press one of the input select buttons.
    • 7 Press PLAY TIMER.
    • ■ When you have made a wrong setting on steps 1 to 4 (on page 50)
    • Press CANCEL.
    • Press CLOCK/TiMER in the power standby mode.
    • ■ To cancei timer piay Press PLAY TiMER.
    • ■ To change the timer setting
    • ■ To change the source oniy
    • ■ To use the play timer everyday
    • Switch on the power.
    • 1 Press CLOCK/TIMER.
    • 2 0 Turn the jog dial to select R-TIMER.
    • 0 Press SET.
    • 0 Press SET.
    • 0 Press SET.
    • Press SET.
    • 5 Press the TUNER input select button and tune in the station whose broadcast you want to record.
    • ■ To confirm timer recording
    • ■ To cancel timer recording Press REC TIMER.
    • ■ To change the timer setting
    • ■ To change the source only
    • ■ To stop the timer recording on the way
  • To use the sleep timer
• Enjoying the Microphone Mixing
  • Using the “KARAOKE” feature
• Using an External Unit
  • To enjoy an external source
    • 1 Press the PHONO input select button.
    • 2 operate the unit which is connected to the system.
    • ■ To record on a DAT tape
    • ■ Recording from an external source
  • Selecting the display
    • Press DISPLAY on the tuner section.
  • About the spectrum display
    • Press DISPLAY momentarily on the amplifier section.
    • 2j Peak-hold display
    • in Aurora display
    • n Symmetry display
    • n Bass-mode display
• Care & Use
  • I Concerning Cassette Tapes"
    • ■ Selection of cassette tapes
    • ■ Improper tape storage
    • ■ Tape slack
  • I Concerning Compact Discs
    • ■ Handling precautions
  • Maintenance
    • ■ Cassette deck head care
    • ■ Cassette deck head demagnetization
    • ■ Maintenance of external surfaces
    • Problem
    • Probable cause(s)
    • Suggested remedy
  • While listening to FM broadcasts
    • Problem
    • Probable cause(s)
    • Suggested remedy
  • Matsushita Electric Industrial Co., Ltd.