Yamaha HTR-6080 - Manual (Page 35)

Optimizing the speaker setting for your iistening room
Press ®
<1
/
D>
repeatedly to toggle between
the setup result displays.
Press / V to toggle between the parameters in a
results.
Results of the speaker
connection and wiring
Results of the speaker
distance from the
listening position
Results of the setting of
each speaker size
Results of the parametric
equalizer of each speaker
Results of the speaker
output level
If you arc not satisfied with the results or want to manually
adjust each parameter, use “MANUAL SETUP” (see
page 69).
Notes
• The distances displayed in the ’’DISTANCE’' results may
be longer than the actual distance depending on the
characteristics of your subwoofer.
• In the ‘’EQ'' results, different values may be set for the
same frequency to provide finer adjustments.
10 Press ©ENTER to return to the top
“AUTO;RESULT” display.
11 Make sure the pointer is pointing at “SET”
and “CANCEL” and then press ®<I / !> to
select “SET” or “CANCEL”.
filJTO :suL.T
RESyiT^^ ^
msil
I4j3/i?l0fi
LUL. ^ ''9j3.--Hb„5dB
:>SL-T CPI-^CEL
CA]/['^]syp/DG!..ji-i
Choices: SET, CANCEL
• Select “SET” to confirm the “AUl'O SETUP”
results.
• Select “CANCEL” to cancel the “AUTO SETUP”
results.
12 Press ©ENTER to confirm your selection.
The top “SE'r MENU” display appears in the OSD.
■HUTu SETUP'
■ MflHUlTL SETLIF'
■SIGHBL !HF0
[.ii].'[«!UFv'Dowri
[ENTERTEnisr
13
Press ®SET MENU to exit from “SET
MENU”.
14
Disconnect the optimizer microphone from
this unit.
The optimizer microphone is sensitive to heat. Keep it
away from direct sunlight and do not place it on top
of this unit.
If you change speakers, speaker position.s, or the layout of
your listening environment, run “AUTO SETUP" again u>
recalibrate yotir system.
31
En