Yamaha HTR-6080 - Manual (Page 92)

Remote control features
Setting remote control codes
You can control other components by setting the
appropriate remote control codes. For a complete list of
available remote control codes, refer to “List of remote
control codes” at the end of this manual.
Remote control code default settings
Input
source
Component
category
Manufacturer
Default
code
CD CD YAMAHA 62000
MD/CD-R CDH< YAMAHA 71292
DVD DVD YAMAHA 42000
DTV/CBL - - -
TUNER TUNER YAMAHA 8200.6
XM TUNER YAMAHA 82006
V-AUX
OTHER AUDIO
ACCESSORIES
(iPodi
YAMAHA 82000
DVR DVR YAMAHA 52001
VCR - - -
PHONO - - -
Note
You may not be able to operate your Yamaha component even if a
YAMAHA remote control code is preset as listed above. In this
case, try setting another YAMAHA remote control code.
1 Press one of the input selector buttons (®)
on the remote control to select the input area
you want to set up.
(Z) (cD^
Press ©CODE SET using a ballpoint pen or
a similar object.
I he ©TRANSWIIT indicator on the remote control
flashes twice, and the selected input selector button
lights up.
------- f DVD j ------------
/ j \
Lights up
TRAKSMIT
Flashes
Press the numeric buttons (0 to 9) (®) to
enter the five-digit remote control code for
the component to be used.
I he ©TRANSWIIT indicator on the remote control
flashes twice, and the remote control code for the
selected component is set.
CLASSICAL LiVEfCLUB ENTERTAIN MOVIE
0 ©
stere V v ^ hancer straight pure pracT
0 0 0 0
SUR.DEC0M NIGHT
© ©
TRAPISfiflT
;:o:;
Flashes
Refer to ’'List of remote eonirol eodes" at the end of this
manual.
Notes
• If the niantifaclurer of your component has more than one
code, try each of them utilil you find the correct one.
• If you do not press any buttons within 30 seconds in step
3, the setup process is canceled. If this happens, repetil the
setup procedure.
• If you enter the code number ■’9980'', the remote control
code previously set for the selected input area is cleared.
88 En