Controlling this unit a tv, or other components, Controlling a tv, Notes – Yamaha HTR-6080 User Manual
Page 90
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote control features
Controlling this unit a TV, or other components
■ Controlling this unit
Set the operation mode selector to ®
AMP
to control this
unit.
■ Controlling a TV
Set the operation mode selector to
®TV
to control your
TV. To control your TV, you must set the appropriate
remote control code for DTV/CBL or PHONO (see
page 88). When you set the remote control codes for both
DTV/CBL and PHONO, priority is given to the one set for
DTV/CBL,
■*1
-*1
Notes
”1 These buttons always control this unit regardless of the
operation mode selector position.
*2 These buttons control this unit only when the component
operation mode selector is set to ®
AMP.
Notes
"I These buttons always control yotirl’V regardless of the
operation mode selector position.
Remote control
Digital TV/Cable TV
TV POWER
Turns ihe power on or oil.
TV VOL +/.
Increases or decreases the volume
level.
TV CH +/
Changes the channel niimher.
TV MUTE
Mutes the audio output.
TV INPUT
Changes the input source.
*2 These buttons control your TV only when the operation mode
selector is set to
®TV.
For dettiils, see the "Digital TV/Cable
TV" column on page 87.
86 En