Yamaha HTR-6080 - Manual (Page 89)

Remote control features
In addition to controlling this unit, the remote control can also operate other audiovisual components made by Yamaha
and other manufacturers. To control your TV or other components, you must set up the appropriate remote control code
for each inpui soiircc iscc paac S8).
Using the remote control for the SCENE feature
■ Controlling the Input source
components in the SCENE mode
You can operate both this unit and the input source
component by using the remote control. You must set the
appropriate remote control code for each input source in
advance (see page 88).
1
Press the desired ©SCENE button on the
remote control.
2
Press the desired buttons in the * area below
to control the input source component of the
selected SCENE template.
■ Setting the Input source of the
customized SCENE template on the
remote control
[f you customize the input source of the selected SCENE
template, you must set the input source of the SCENE
template on the remote control to operate the input source
component correctly.
1
Press the desired ©SCENE button on the
remote control.
2
Press and hold the ©SCENE button and the
desired input seiector button (©).
The ©TRANSMIT indicator flashes twice.
3
Keep holding down the buttons pressed in
step 2 until the ©TRANSMIT indicator
flashes twice again.
Note
If the setting of the input source is not successful, the
©TRANSMIT indicator flashes repeatedly. In this case,
repeat the setup procedure.
Note
• These buttons control the input source component. See page 87
for details of the function of each button.
85
En