Yamaha HTR-6080 - Manual (Page 61)

XM Satellite Radio tuning
Before performing the following operation!^, !^eiihe operation
mode selector on the remote control to ©SOURCE.
Displaying the XM Satellite Radio
information
You can display the XM Satellite Radio information (such
as channel number, channel name, category, artist name,
or song title) for the currently selected channel in the front
panel display or in the OSD.
Note
If a status message or an error message appears in the front panel
display or in the OSD, see the "XM Satellite Radio” section in
"Troubleshooting” on page 94 for appropriate remedies.
■ Displaying the XM Satellite Radio
information In the front panel display
Press © DISPLAY (or ©DISPLAY) repeatedly to
toggle between the following XM Satellite Radio
information display modes.
Channel number / name
I
Channel category
I
Artist name / Song title____
When the channel number / name is displayed:
When the channel category is displayed:
* The from panel display can indicate up to 14 alphanumeric
characters aionee. You can set w'hether to display the XM
Satellite Radio information in the front panel display in a
continuous manner or by 14 alphaiuimeric characters at once by
using the “FL SCROLL” parameter in ‘'OPTION MENU” (see
page 82).
■ If the XM Satellite Radio information contains a character that
cannot be recognized by this unit, the character will be
dispLiyed with a space.
Note
If you press ©DISPLAY (or ©DISPLAY) while the XM
Satellite Radio information display is serolling from righuo left
in the from panel display, the XM Satellite Radio information
display nu)de toggles as described above.
■ Displaying the XM Satellite Radio
information in the OSD
Press ©DISPLAY (or ©DISPLAY).
The following screen is displayed in the 0,SD.
ÏI-.IF!: i F:H h T î ON
PL .. CH 'L- h RCH
?!l'1 : ¿143
»
CPi Ï F:ock
HPI'IE : -ClHpla'-i
TITLE. ^ -^P 0pd of sound
4 >. 1 .i"
E-H.] --CTlsCHQHNEL.
i~4l
-THiLflihLURV
\
To turn off the OSD, press © DISPLAY (or ©DISPLAY)
again.
You can select the amount of time the XM Satellite Radio
information is displayed in the OSD by using the "OSD-
SOURCE” parameter in "OPTION MENU” (see page 82).
To hold the XM Satellite Radio information screen, press
©ENTER on the remote control while it is being displayed in
the OSD.
The XM Satellite Rtidio information screen on hold is rcletised
if you press ©ENTER on the remote control again or if you
change the XM Satellite Radio channel.
This unit can save up to two XM Satellite Radio information
screens for future reference. To view' the previous tw-o XM
Satellite Radio information screens, press ©TITLE on the
remote control repeatedly while the current XM Satellite Radio
infortnation screen is hold.
When the artist name / song title is displayed:
57
En