Displaying the current settings for the ssh server, Disabling the ssh server – Panasonic 7 User Manual
Page 116
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
116 Chapters Configuring the system
Displaying the current settings for the SSH server
To display the current settings for the SSH server, from CLI Global Configuration
Mode, enter:
show ssh-server { port | state }
where:
•
port—shows the SSH server port
•
state—specifies the state (enabled or disabled) of the SSH server
For example, to display the current SSH server port for the Nortel VPN Router,
enter:
CES(config)#
show ssh-server port
For example, to display the state (enabled or disabled) of the current SSH server
for the Nortel VPN Router, enter:
CES(config)#
show ssh-server state
Disabling the SSH server
To disable the SSH server, from CLI Global Configuration Mode, enter:
no service ssh enable
For example, enter:
CES(config)#
no service ssh enable
NN46110-S00