Panasonic 7 User Manual
Page 88
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
88 Chapter 4 Configuring user tunnels
Figure 12 Edit > IPsec page for wildcard
2
Select Enabled - Inverse or Enabled Locally Connected from the Split
Tunneling menu.
The Split Tunneling menu is used to select the tunneling mode that is used by
the selected group. Table 7 shows the options.
Table 7 Split tunneling mode options
Split Tunneling Selection Network Selection sent to NVC
Disabled
None
Enabled
Split Tunnel networks
Enabled-Inverse
Inverse Split Tunnel Networks
Enabled-Inverse (locally
connected)
Inverse Split Tunnel Networks
NN46110-500
Advertising