Chapter 2 getting started, Ip addressing, Chapter 2 – Panasonic 7 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
29
Chapter 2
Getting started
This chapter describes methods for configuring and managing the Nortel VPN
Router .
Note:
If you are setting up a Nortel VPN Router 1010, 1050 or 1100,
see Chapter 3, “Setting up the Nortel VPN Router 1010, 1050, and
1100.” These VPN Routers have unique set up and configuration
considerations.
Full details on hardware installation, including adding local area network (LAN)
or wide area network (WAN) cards, are in the Getting Started or installation guide
that came with the Nortel VPN Router. You should complete the hardware
installation before starting this chapter.
IP addressing
Figure 3 on page 30 shows sample IP address assignments in a network using a
Nortel VPN Router. Refer to Table 1 on page 30 to see the IP address associations.
Nortel VPN Router Configuration — Basic Features