Configuring interfaces – Panasonic 7 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
36 Chapter 2 Getting started
7 Type M and press Enter to change the Management IP address. The current
IP address appears. The Old Management IP Address field is blank on a new
Nortel VPN Router.
Please select a menu choice (M, R): M
Type 0.0.0.0 to delete.
Just type <CR> to skip.
Old Management IP Address = 192.168.249.44
New Management IP Address =
Configuring Interfaces
Use the following procedure to configure the interfaces of the system.
1
Type 1 and press Enter to display the configured Interfaces:
Please select a menu choice (0 - 9,B,P,C,L,R,E): 1
- Interface Menu
0) Slot 0, Port 1, Private LAN
IP Address = 47.17.163.163
Subnet Mask = 255.255.255.240
Speed/Duplex = AutoNegotiate
1) Slot 1, Port 1, Public LAN
IP Address =
Subnet Mask = 0.0.0.0
Speed/Duplex = AutoNegotiate
2) Slot 2, Port 1, Public LAN
IP Address =
Subnet Mask = 0.0.0.0
Speed/Duplex = AutoNegotiate
3) Slot 4, Port 1, Public WAN
IP Address =
Subnet Mask = 255.255.255.255
Line Format = T1
Line Coding = B8ZS
HDLC Polarity = normal
Line Framing = T1 ESF
Line Build Out = 0.0 dB
Timing Source = Loop
Performance Report Message = ANSI
NN46110-500