Panasonic WV-BS504 - Manual (Page 16)

(2) To copy a preset ID from another position
Move the cursor to COPY and press the CAM (SET) key. The
preset ID in the imnnediately preceding position is shown. Each
consecutive operation of the CAM (SET) key displays the ID
preceding the one currently displayed.
(3) To change an edited PRESET ID
Set the cursor to [i-] or [->] and press the CAM (SET) key, so the
cursor moves in the editing cursor position. Move the cursor to
the respective character, and select new character.
(4) To delete an edited PRESET ID
Move the cursor to RESET and press the CAM (SET) key.
(5) To set a display position for a PRESET ID
Move the cursor to POSI and press the CAM (SET) key. The
PRESET ID blinks and the display position set menu appears.
Using the joystick, move the ID to the desired position on the
screen, then press the MON (ESC) key. The display position is
set and the screen returns to the PRESET ID menu.
PRESET NO.IS'H
0123456789
ABCDEFGBIJKLM
NOPQRSTUVWXYZ
’ ":;&#!?■>
1- -> SPACE
COPYf' POSI BET RESET
DOOR.
PRESET H0.15*H
01234567B9
ABCDEF6BIJKLH
NOPQRSTUWOCYZ
( ) , , ■ ■ : ; & # ! ? -
+-•/%$
g-i SPACE
COPY POSI RET RESET
PRESET N0.15*H
0123456789
ABCDEFGHIJKUl
NOPQRSTUVWXYZ
+-*/%$
(- SPACE
COPY POSI RET [RESETi
PRESET N0.15*H
0123456789
ABCOEFGSIJKIiH
NOPQRSTUVWXYZ
+-*/%$
1- -> SPACE
COPY POSI RET RESET
(6) To return to the preset menu
Move the cursor to RET and press the CAM (SET) key. PRESET N0.15*H
0123456789
ABCDEFGHIJKLH
NOPQRSTUVWXYZ
+-*/%$
t- -i SPACE
COPY POSI RET RESET
- 14 -