Panasonic WV-BS504 - Manual (Page 20)

6.
To set endless turn ON/OFF
Move the cursor to ENDLESS, and move the joystick to the left or right
to set endless turn ON or OFF.
ON: The camera pans from the start position to the end position, then
keeps rotating in the same direction to return to the start position.
OFF: The camera pans from the start position to the end position,
then rotates backward to the start position.
This movement is repeated over and over.
To set a dwell time
Move the cursor to DWELL TIME and select a dwell time by moving
the joystick to the left or right. Dwell time changes as follows:
** AUTO PAN **
POSITION START
END
SPEED ... I . . . .
L H
ENDLESS ON
DWELL TIME 2S
IS ^2S
4MIN -
3S ^ 5S
2MIN
10S 30S
- 1MIN
Note: When the panning, tilting, lens zoom or focus operation is
controlled manually, the Auto mode function should be canceled.
To activate Auto mode, select AUTO MODE ON again.
** AUTO PAN **
POSITION START
END
SPEED ... I . . . .
L H
ENDLESS ON
DWELL TIME 2S
LOCAL/REMOTE Setting
Move the cursor to LOOAL/REMOTE, and move the joystick to the left
or right.
You can toggle between LOCAL and REMOTE.
Note: REMOTE does not work when the WV-RM70 is connected.
Make sure LOCAL is selected in this case.
Setup menu
* * * SET UP MENU ***
PRESET 1*
MAP*
HOME POSITION
15
SELF RETURN lOMIN
AUTO MODE OFF
LOCAL/REMOTE [LOCALT
CAMERA *
■ Camera Setting
1. To display the Camera Setting Menu
1. Move the cursor to CAMERA*, and press the CAM (SET) key. The
camera setting menu is displayed.
Setup menu
—
* * * SET UP MENU ***
PRESET 1*
MAP*
HOME POSITION 15
SELF RETURN lOMIN
AUTO MODE OFF
LOCAL/REMOTE LOCAL
tCAHERAl^
__________
Camera setting menu
/
* * SET UP **
CAMERA ID OFF“*i
ALC/MANUAL ALC *
SHUTTER OFF
AGC ON
SENS UP OFF
SYNC INT
WHITE BAL ATW *
WIDE D-RANGE OFF
MOTION DET OFF
AF MODE MANUAL*
- 18 -