Preface, Features, Precautions – Panasonic WV-BS504 User Manual

Page 4: R- caution

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

PREFACE

Panasonic

presents

highly

advanced

CCVE

technology meets the demand of new and ever-

changing applications. This model is utilized video

surveillance device that incorporates a Digital signal

Processing

(DSP)

high-performance

camera,

pan/tilt

mechanism,

10

times

zoom

lens

and

receiver in its compact enclosure.

The

camera

portion

incorporating

a

high-sensitivity

CCD provides 480-line horizontal resolution for WV-

CS604A, WV-CS604, and WV-CST604 (500-line for

WV-BS504 and WV-BST504) and an S/N ratio of 48

dB for WV-CS604A, WV-CST604 and WV-CSR604

(46 dB for WV-BS504 and WV-BST504). With its

advanced

digital

signal

processing

circuit,

it

is

equipped to handle the surveillance tasks of the

coming age.

The pan/tilt portion, allowing 360-degree endless

panning, is designed to meet specific user need.

This model utilized surveillance device offers

cutting-edge technology for advanced video

surveillance.

FEATURES

1. The following functions are built in.

(1) Auto Light Control (ALC)/Manual Override

Iris

(2) Character Generator

(3) Back Light Compensation (Auto; Factory

preset, Manual:

Manual photometric

measuring area set)

(4) Auto/Manual White Balance Function
(5) Electronic Shutter Function

2.

Minimum illumination of 3 lx (0.3 foot-candle)

for WV-CS604A and WV-CSR604, 6 lx (0.6 foot-

candle)

for

WV-CST604,

0,1

lx

(0.01

foot-

candle) for WV-BS504, and 0.2 lx (0,02 foot-

candle) for WV-BST504.

3. High quality picture;

(a) 2H type vertical enhancer for greater

picture sharpness

Chroma averaging circuit for better color

signal to noise ratio (available only with
WV-CS604A, WV-CSR604, or WV-CST604 )

Minimum of aliasing on fine objects

Expanded dynamic range by use of knee

circuit

Highlight

aperture

correction

for

greater

picture detail of bright objects

(b)

(c)

(d)

(e)

4.

Back

Light

Compensation

for

use

under

unusual lighting conditions.

5.

Selectable

electronic

sensitivity

enhancing

modes including : AUTO, MANUAL and OFF

6. Built in Digital Motion Detector

7.

64 preset position-position, focus, zoom ratio,

rotation mode, etc.

8. 360-degree endless panning.

9.

Maximum 240 degrees/second speed from one

position to the next.

10.

There is no distance limit for remote access

with the specified extension unit, (only for WV-

CSR604) ■

PRECAUTIONS

Do not attempt to disassemble this unit. There

are

no

user

serviceable

parts

inside.

Refer

servicing to qualified service personnel,

This unit is designed for indoor use or locations

where it is protected from rain and moisture.

• Be sure to mount on a flat ceiling.

Do not drop metallic parts through slots. This

could permanently damage this unit. Turn the

power off immediately and refer servicing to

qualified service personnel.

Wipe the cover regularly with a soft and dry

cloth, or a cloth moistened with a solution of

water and normal kitchen detergent.

Do not use chemicals for cleaning the cover as

it may damage the surface.

Refer all work related to the installation of this

product

to

qualified

service

personnel

or

system installers.

Use this unit in an environment where the

temperature is within -10“C - -

h

50°C (14°F -

122°F), and the relative humidity within 90%.

Never

aim

the

camera

at

bright

objects.

Whether the camera is in use or not, never aim

it at the sun, or other extremely bright objects

as this could cause blooming.

This unit is designed exclusively for ceiling

installation. If installed in standup position, the

picture will be upside down and the pan/tilt

movement will be reversed.

r- CAUTION-----------------------------------------------------

To prevent fire or electric shock hazard, the UL

listed wire, VW-1, style 1015, AWG 18 or UL

listed power supply cord, type SJT should be

used for the cable for 24V AC input terminals.

- 2 -

Advertising
This manual is related to the following products: