Camera identification setting (camera id), Notes, Ft#i – Panasonic WV-BS504 User Manual

Page 21: Ft#j7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

2. Camera Identification Setting (CAMERA ID)

• Move the cursor to CAMERA ID, and select ON (to display the camera

identification) or OFF by using the joystick.

• Follow the steps below to edit the camera ID characters;

1. Move the cursor to CAMERA ID and press the CAM (SET) key to

display the character editing menu. The character cursor on the
letter “0" and the editing cursor on the left of the editing area start
blinking,

2. Move the character cursor to the character you want to change

by using the joystick, and press the CAM (SET) key. The
selected character appears in the editing area. (The blinking

editing cursor moves to the right automatically at this moment.)

3. Repeat the steps above until all characters are edited.

• After editing the camera identification characters, follow the steps

below to set the position of the CAMERA ID on the monitor screen.

1. Move the cursor to POSI, and press the CAM (SET) key to display

the ID position menu. The CAMERA ID starts blinking and the ID

position menu appears in the display.

2. Use the joystick to decide the position of the CAMERA ID on the

monitor screen. Press the MON (ESC) key to fix the position, and
return to the character editing menu.

Notes:

1. When you want the editing cursor to move to a specific character

in the editing area, move the character cursor to or and
press the CAM (SET) key. This function helps you to edit or

correct a specific character.

2. When you want a blank space in the CAMERA ID, move the

character cursor to SPACE, and press the CAM (SET) key.

3. When you want to erase all characters in the editing area, move

the cursor to RESET and press the CAM (SET) key.

4,

6

.

The positioning of the CAMERA ID stops at the edges of the

screen.

The CAMERA ID moves faster when the joystick is kept pressed
for more than 0,5 seconds.
To return to SET UP for setting other items, move the cursor to

RET, and press the CAM (SET) key.

•• SET UP **

CAMERA ID

OFF *

ALC/MANUAL

ALC *

SHUTTER

OFF

AGC

OH

SENS UP

OFF

SYNC

INT

WHITE BAL

ATW *

WIDE D-RANGE OFF

MOTION DET

OFF

AF MODE

MANUAL*

RET SPECIAL *

Character editing menu

CAMERA I D . —

0123456789

ABCDEFGHIJKLM

HOPQRSTUVWXYZ

;ft#I?=

+-*/%$

SPACE

-------- iPOSli RET RESET

Blinking

CAMERA I D . - -

0123456789

ABCDEFGHIJKLM
NOPQRSTUVWXYZ

().,•"!;S#l?=

+-*/%$

;t£ SPACE

-------- POSI RET RESET

WV-CS604,

CAMERA I D . - -

0123456789

ABCDEFGHIJKLM

HOPQRSTUVWXYZ

ft#J7-

(-

-)

SPACE

-------- POSI RET RESET,

WV-CS604...........................

- 19-

Advertising
This manual is related to the following products: