Setup menu description, Rs485 site communication (only wv-csr604), Preset – Panasonic WV-BS504 User Manual
Page 8: 1) position (position set), 2) preset identification (preset id), 3) light control (alc/manual), 4) wide-dynamic range (wide d-range), 5) dwell time (dwell time), 6) scene file (scene file), Home position (home position)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ Setup Menu Description
• RS485 site communication (only WV-CSR604)
Communication parameters
• Full/Half duplex (page 29)
• Transmission speed (2400 - 19200 bps) (page 11)
• Parity check, Stop bit, Characters, Flow control (page 11)
• Retransmit time, Delay time. Alarm output (page 11)
• Camera units (96 units max.) (page 29)
• Termination ON/OFF (page 29)
• Reset parameters (page 29)
• PRESET
(1) Position (POSITION SET)
POSITION SET adjusts the camera picture by panning, tilting, zooming and focusing.
See page 12 for the setting.
(2) Preset Identification (PRESET ID)
A preset ID (identification of up to 16 alphanumeric characters) can be displayed on the screen.
See page 13 for the setting.
(3) Light Control (ALC/MANUAL)
ALC/MANUAL refers to the mode of the incoming light level control.
See page 15 for the setting.
(4) Wide-Dynamic Range (WiDE D-RANGE)
WIDE D-RANGE is used to enhance picture viewing. This function is useful, for example, when a picture is
too dark or too bright to watch the object because the lighting conditions are too dim or too bright.
See page 15 for the setting.
(5) Dwell Time (DWELL TIME)
DWELL TIME is the duration that the picture of each camera position is displayed. You can select a preset
duration from the menu.
See page 15 for the setting.
(6) Scene File (SCENE FILE)
SCENE FILE is used to memorize ihe camera shooting scene. You can store up to 10 (scene file No. 1 to
No. 10) camera shooting scenes. The camera functions below are available for detail setting of the scene
files to be stored. These functions are stored in memory together with the scene files.
Camera functions available for detail setting of scene files are: shutter speed, AGC, electronic sensitivity
enhancement, white balance, motion detector and AF mode.
See page 15 for the setting.
• Home Position (HOME POSITION)
HOME POSITION is the camera’s basic position. It returns to this position automatically, when a specified time
has elapsed after a manual operation.
See page 16 for the setting.
• Self Return (SELF RETURN)
SELF RETURN is the time-out parameter for returning to the home position.
See page 17 for the setting.
-6-