STIEBEL ELTRON SOM 6 PLUS - Manual (Page 2)

2
Safety advice:
Please read the following information carefully before
installing and operating the controller. In this way damage
to the solar system caused by wrong installation will be
avoided. Please make sure that the mounting is adapted to
the characteristics of the building, that the local regulations
are respected and is conform with the technical rules.
Description of symbols
Signal words describe the danger that may occur, when it is
not avoided.
Warning means that injury, possibly life-threatening injury,
can occur.
Attention means that damage to the appliance can occur.
Information about the product
Proper usage
The solar controller is designed for use in solar thermal
and heating systems in compliance with the technical data
specified in these instructions.
Improper use excludes all liability claims.
Note
Strong electromagnetic fields can impair the
function of the controller.
Î Make sure the controller as well as the system
are not exposed to strong electromagnetic
fields.
WARNING! Warnings are indicated with a warning
triangle!
Î They contain information on how to
avoid the danger described.
Note
Notes are indicated with an information
symbol.
Subject to technical change. Errors excepted.
Please pay attention to the following safety advice in order to
avoid danger and damage to people and property.
Instructions:
Attention should be paid to
• Valid national and local standards and regulations
• Respective valid standards and directives
Equipment to be installed and used in accordance with the
rules of the National Electrical Code (NEC) or with Canadian
Electrical Code (CEC), Part I.
These instructions are exclusively addressed to authorized
skilled personnel.
• Only qualified electricians should carry out installation
and maintenance work.
• Initial installation should be carried out by qualified personnel
Î Arrows indicate instruction steps that should be carried
out.
General
Contents
General .............................................................................2
Overview ...........................................................................3
1. Installation ..................................................................4
1.1 Mounting ..................................................................... 4
1.2 Electrical connection .................................................... 4
1.3 Data communication/ Bus ............................................ 5
1.4 Terminal allocation ...................................................... 6
2. Operation and function ................................................8
2.1 Push buttons ................................................................ 8
2.2 System monitoring display ........................................... 8 2.3 Flashing codes ............................................................. 9
3. Commissioning...........................................................10
4. Channel overview ......................................................11
4.1 Display channels ........................................................ 11
4.2 Adjustment channels .................................................. 13
5. Troubleshooting .........................................................20
5.1 Various ...................................................................... 21