STIEBEL ELTRON SOM 6 PLUS - Manual (Page 9)

9
green: everything OK
red/green flashing initialization phase
manual operation
red flashing: sensor fault
(sensor symbol is flashing quickly)
2.3 Flashing codes
LED flashing codes
System screen flashing codes • Pump is flashing when the relay is active
• Sensor symbols are flashing if the corresponding sensor
display channel is selected.
• Sensors are flashing quickly in the case of a sensor fault.
The system screen shows the solar system. It consists of several
system component symbols, which are – depending on the
current status of the system – either flashing or permanently
shown.
collector
sensor
collector
pump
tank tank heat exchanger
tank sensor
at the top
Pump Tank
with heat exchanger
Temperature sensor
System screen
system screen
Collector
with collector sensor
tank sensor at the bottom