KEYENCE LR-TB2000 Series - Manual (Page 5)

5
z Full auto calibration
Use this function when the movement of detected objects cannot be stopped.
z 1-point calibration
Use this function to enable the installation of detected objects at the upper limit that you
do not want to detect.
4-3. Window Mode
„ Operation
• In this mode, the distance from the sensor is displayed.
• You can assign setting values to the upper and lower limits.
„ Setting
• Set the detection mode to [Window]. "6 Detailed Settings" (page 8)
• For details on setting output 2, see " 4-5. Switching Out1/Out2" (page 6).
z 2-point calibration
Use this function to detect objects inside a range of specific upper and lower limits.
1567
1234
XX-XXXX
DISP MODE
1 2
1
2
1567
1234
XX-XXXX
DISP MODE
1 2
1567
1234
XX-XXXX
DISP MODE
1 2
N.O.
N.C.
ON
OFF
ON
OFF
Press and hold the set button
for 3 seconds or more.
Completion
Press and hold the set button
for 3 seconds or more.
The object is detected while
the button is pressed.
1
1567
1234
XX-XXXX
DISP MODE
1 2
N.O.
N.C.
1567
1234
XX-XXXX
DISP MODE
1 2
ON
OFF
ON
OFF
Press and hold the set button
for 3 seconds or more.
Completion
1567
1234
XX-XXXX
DISP MODE
1
2
Hys. Hys.
ON
ON
0 2000
N.O.
N.C.
OFF
OFF
NEAR FAR
Hys: Hysteresis ( page 10)
1567
1234
XX-XXXX
DISP MODE
1 2
1
2
1567
1234
XX-XXXX
DISP MODE
1 2
1567
1234
XX-XXXX
DISP MODE
1 2
ON
NEAR FAR
ON
N.O.
N.C.
OFF
OFF
Completion
Press the set button for 1 second or less.
Press the set button for 1 second or less.