KEYENCE PS-N10 Series - Manual (Page 9)

9
„
System Settings (SYS)
*1 Main unit only.
*2 The PS-47(C), PS-48, PS-49(C), PS-58 and PS-206 do not support long-distance detection
mode. Do not select long-distance detection mode when using these sensor heads.
• Press the button and the button simultaneously to return to the
previous setting.
• When the button is held down, the settings will end.
*2
*1
Settings complete
Go to detection setup mode
Go to display setup mode
Return to system setup mode
Normal operation
Twice the number of
interference-prevention units as
STD
(response time 2 times slower)
Eco feature off
Enable eco feature
Reduce power consumption
(response time 4 times slower)
Disable common key operations
Enable common key operations
Standard current value display
Maximum current value display
(4 times hysteresis)
Return to normal display
Disable long mode
Enable long mode
Reference
MODE
MODE