System settings (sys), Output 2 settings*1 – KEYENCE LV-N10 Series User Manual
Page 9
9
System Settings (SYS)
*1 Not displayed when LV-S31 is connected.
*2 Main unit only.
Output 2 Settings (
)
*1
*1 Only 2 output types (LV-N11x / N12x).
*2 Press the
button to select the
(user reset) or
(auto reset) resetting meth-
ods.
*3 Select the count method from
,
or
. When
is selected, the one-
shot time can be set between
and
(ms).
*4 Press the
button to set between the range of
and
(ms).
•
Press the
button and the
button simultaneously to return to the
previous setting.
•
When the
button is held down, the settings will end.
*2
*1
Settings complete
Go to detection setup mode
Go to display setup mode
Return to system setup mode
Normal operation
Twice the number of
interference-prevention units as
56&
(response time 2 times slower)
Eco feature off
Enable eco feature
Reduce power consumption
(response time 4 times slower)
Disable common key operations
Enable common key operations
Standard current value display
Maximum current value display
(4 times hysteresis)
Return to normal display
Standard sensitivity
High resolution sensitivity
*2
Counter output mode *
3
Light intensity detection mode
Limit setting output mode *
2
Warning output mode
Timer OFF
Off-delay timer *
4
On-delay timer *
4
One-shot timer *
4
Settings complete
Return to normal display
MODE
MODE
Reference
MODE
MODE