KEYENCE IB Series - Manual (Page 2)

2
Before using the unit, confirm that the parts and equipment listed below are
included in the package of the model you purchased.
„ Sensor amplifier unit
z DIN rail mount type
z Panel mount type
„ Sensor head
z Sensor head
We have thoroughly inspected the package contents before shipment. However, in
the event of defective or broken items, contact your nearest KEYENCE office.
Precautions on Regulations and Standards
CE Marking
Keyence corporation has confirmed that this product complies
with the essential requirements of the applicable EC Directives,
based on the following specifications. Be sure to consider the
following specifications when using this product in the Member
States of European Union.
„
EMC Directive
• Applicable standards EMI: EN60947-5-2, Class A
EMS: EN60947-5-2
These specifications do not guarantee that the end-product with
this product incorporated complies with the essential
requirements of the EMC Directives. The manufacturer of the
end-product is solely responsible for ensuring the compliance of
the end-product.
„
Low-voltage Directive
• Applicable standard: EN60825-1
UL Certification
This product is an UL/cUL Listed product.
• UL File No. E301717
• Category: NRKH, NRKH7
Be sure to consider the following specifications when using this
product as an UL/cUL Listed Product.
• Use the power supply with Class 2 output defined in NFPA70
(NEC: National Electrical Code).
• The UL certificate for the IB series is for the sensor head and
amplifier used incombination. The IB series sensor head must
be used together with the IB series sensor amplifier unit
exclusively.
• Power supply/ Control input/ Control output shall be
connected to a single Class 2 source only.
• Use with the over current protection device which is rated 30 V
or more and not more than 1 A.
• Use this product under pollution degree 2.
Checking the Package Contents
NOTICE
Amplifier x 1
Instruction manual x 1
Amplifier x 1
IB-1000 (main unit) IB-1050 (expansion unit)
Amplifier x 1
IB-1500 (main unit)
Panel mounting bracket x 1 Front protection cover x 1
Instruction manual x 1 Power/Input-output cable (2 m) x 1
(Number of cable cores: 12)
Amplifier x 1
IB-1550 (expansion unit)
Panel mounting bracket x 1 Front protection cover x 1
Power/Input-output cable (2 m) x 1
(Number of cable cores: 8)
Expansion cable (50 mm) x 1
R
. o N L A I R E S
R E S A L T
IB-01 (Detecting area I1 to 2.5 mm)
Transmitter x 1 Receiver x 1
Mounting bracket x 2
Flat nut x 2
M3 x L20 screw x 4
R E S A L
T
R
. o N L A I R E S
IB-05 (Detecting area 5 mm)
Transmitter x 1 Receiver x 1
Mounting bracket x 2
Flat nut x 2
M3 x L25 screw x 4
R E S A L
T
R . o N L A I R E S
IB-10 (Detecting area 10 mm)
Transmitter x 1 Receiver x 1
Mounting bracket x 2
Flat nut x 2
M3 x L25 screw x 4
LASE R
IB-30 (Detecting area 30 mm)
Mounting
bracket x 2
M4 x L25 screw x 6
Transmitter x 1 Receiver x 1