KEYENCE CA-MP81 - Manual (Page 2)

2
Copyright (c) 2010 KEYENCE CORPORATION. All rights reserved.
11412E 1015-2 96M11412 Printed in Japan
If your monitor needs adjustment due to ambient light, the installation angle, or the
characteristics of the connected device, follow the procedure below.
1. Press the button on the rear of the monitor. The setting menu is displayed.
2. Press the button to move the cursor onto the item to change the setting.
3. Press the button to change the setting of the item.
4. Press the button to change the value/setting.
5. Press the button to return to the status of step 1.
6. When you complete the adjustment, press the button to exit the setting menu.
*1 AUTO ADJUSTMENT function
Pressing the button adjusts the settings automatically to optimum values for the
video signals being input.
Target items: POSITION, CLOCK, FOCUS
(This function activates automatically when video signals are input for the first time after
the purchase.)
(1) KEYENCE warrants the Products to be free of defects in materials and workmanship for a
period of one (1) year from the date of shipment. If any models or samples were shown to
Buyer, such models or samples were used merely to illustrate the general type and
quality of the Products and not to represent that the Products would necessarily conform
to said models or samples. Any Products found to be defective must be shipped to
KEYENCE with all shipping costs paid by Buyer or offered to KEYENCE for inspection
and examination. Upon examination by KEYENCE, KEYENCE, at its sole option, will
refund the purchase price of, or repair or replace at no charge any Products found to be
defective. This warranty does not apply to any defects resulting from any action of Buyer,
including but not limited to improper installation, improper interfacing, improper repair,
unauthorized modification, misapplication and mishandling, such as exposure to
excessive current, heat, coldness, moisture, vibration or outdoors air. Components which
wear are not warranted.
(2) KEYENCE is pleased to offer suggestions on the use of its various Products. They are
only suggestions, and it is Buyer's responsibility to ascertain the fitness of the Products
for Buyer’s intended use. KEYENCE will not be responsible for any damages that may
result from the use of the Products.
(3) The Products and any samples ("Products/Samples") supplied to Buyer are not to be
used internally in humans, for human transportation, as safety devices or fail-safe
systems, unless their written specifications state otherwise. Should any Products/
Samples be used in such a manner or misused in any way, KEYENCE assumes no
responsibility, and additionally Buyer will indemnify KEYENCE and hold KEYENCE
harmless from any liability or damage whatsoever arising out of any misuse of the
Products/Samples.
(4) OTHER THAN AS STATED HEREIN, THE PRODUCTS/SAMPLES ARE PROVIDED
WITH NO OTHER WARRANTIES WHATSOEVER. ALL EXPRESS, IMPLIED, AND
STATUTORY WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,
AND NON-INFRINGEMENT OF PROPRIETARY RIGHTS, ARE EXPRESSLY
DISCLAIMED.
IN NO EVENT SHALL KEYENCE AND ITS AFFILIATED ENTITIES BE LIABLE TO
ANY PERSON OR ENTITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, PUNITIVE,
SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION,
ANY DAMAGES RESULTING FROM LOSS OF USE, BUSINESS INTERRUPTION,
LOSS OF INFORMATION, LOSS OR INACCURACY OF DATA, LOSS OF PROFITS,
LOSS OF SAVINGS, THE COST OF PROCUREMENT OF SUBSTITUTED GOODS,
SERVICES OR TECHNOLOGIES, OR FOR ANY MATTER ARISING OUT OF OR IN
CONNECTION WITH THE USE OR INABILITY TO USE THE PRODUCTS, EVEN IF
KEYENCE OR ONE OF ITS AFFILIATED ENTITIES WAS ADVISED OF A POSSIBLE
THIRD PARTY’S CLAIM FOR DAMAGES OR ANY OTHER CLAIM AGAINST BUYER.
In some jurisdictions, some of the foregoing warranty disclaimers or damage limitations
may not apply.
BUYER'S TRANSFER OBLIGATIONS:
If the Products/Samples purchased by Buyer are to be resold or delivered to a third party,
Buyer must provide such third party with a copy of this document, all specifications,
manuals, catalogs, leaflets and written information provided to Buyer pertaining to the
Products/Samples.
E 1101-3
Adjustment Procedure
When no video signal is input, a blue screen (with message "NO SYNC
SIGNAL" for the first five minutes) is displayed instead of the setting menu.
Auto-escape function
If no button is pressed for about 10 seconds, the setting menu display is
turned off. When this occurs, the change(s) made so far will be saved.
Item Setting
BRIGHTNESS
Adjusts the brightness of the backlight of the LCD panel.
(Only BRIGHTNESS can be adjusted directly with
the
button.)
CONTRAST
Adjusts the contrast of the image. (Adjustable only when the
sRGB mode is set to off.)
COLOR MODE
Adjusts the color tone of RGB individually. (Adjustable only
when the sRGB mode is set to off.)
sRGB
Switches the sRGB mode between on and off. The initial
setting is off.
BLACK LEVEL
Adjusts the black level. (Adjustable only when the sRGB
mode is set to off.)
POSITION Adjusts the horizontal/vertical position of the screen. *1
CLOCK
Adjusts the horizontal size of the screen by adjusting the
clock.
*1
FOCUS
Reduces blurred characters and images by adjusting the
focus.
*1
EXIT
Sets the other items.
BUTTON LOCK: Disables all key operations. The lock is released
when the
button is pressed for 3 seconds or more.
INFORMATION Displays the device setting information, etc.
RECALL Resets the settings to the factory default (initial) settings.
Specifications
Product name LCD color monitor
Model CA-MP81
Display
panel
Display element a-Si, TFT active matrix method
Display color 262,144
No. of dots 800 (W) x 600 (H) dots
Active display area 170.4 (W) x 127.8 (H) mm
Backlight Operating life
Approx. 50,000 hours (average)
(When installed in an upright position under 25°C (77°F))
Input
Input signal
Analog RGB signal (0.7 Vp-p, 75 Ω), Horizontal/vertical
synchronization signal
Input signal mode 800 (W) x 600 (H), Vertical frequency: 60 Hz
Connector High-density D-sub 15-pin female (3-way, inch screw)
Power-supply voltage 24 VDC ±10%
Current consumption 1A max.
Ambient temperature 0 to +40°C (32 to 104°F)
Relative humidity 35 to 85%
Construction
Panel-mount type
Only the front face is dust-proof and splashproof equivalent to IP65
Weight Approx. 1200 g
The TFT LCD panels may have bright dots that always illuminate and dark
dots that never illuminate. This is inevitable due to the manufacturing
process and is not a product failure.
Reference
MENU
MENU
MENU
DEFAULT
Reference
The name of the item
being selected is
displayed.
MENU
DEFAULT
Reference
Dimensions
Warranties and Disclaimers
75
39
38
75
52.5
77.5
76.2
24.3 93.5 4-ø6
135
171
4 x M4
(Depth: 5.6 mm)
31.5
6
230
34
Panel thickness:
1.0 to 4.0 mm
106
241.2
156
170.4
191.2
180
127.8
151
(Dimension
of mounting
bracket) (Active
display area)
(Active display area)
(Dimension of
mounting bracket)
Mounting
screw
169.5
205
0
+1
0
+1
219.5
255
Mounting
bracket
* When OP-66842 is
connected
LCD color monitor
CA-MP81
Panel cutout
Unit: mm