KEYENCE IV Series - Manual

1
Vision Sensor
IV Series Setting Guide
Monitor Display
 Menu OFF
 Menu ON
(1) Title
Displays the device name, the program number and the program
name.
(2) Tool name
Displays the tool number and the tool name of the tool selected. The
selected tool can be switched.
(3) Brightness correction range
When the Brightness correction is set, the range will be displayed
with a blue frame.
(4) Tool window
Displays the tool window which has been set.
(5) Search Window
If the search window of the tool is set, the range will be displayed
with a light blue frame.
(6) [MENU] button
Changes the screen to the Menu ON screen.
(7) [OFF] button
Changes the screen to the Menu OFF screen.
(8) Status gauge
Displays the result (OK/NG) of the tool selected.
(9) OK/NG display
Displays the total status result.
(10) Processing time
Displays the time from receiving a trigger until the result is output.
(11) [Image Type] display
Displays the situation of the screen. Run mode or Test mode.
(12) [Trig] button
Displayed when the external trigger is set. When this button is
touched, a trigger signal is sent to the sensor.
(13) [Zoom] button
Changes the display to full screen mode and makes it possible to
enlarge the image.
(14) [View] button
Displays the menu to select how to show the tools and the analyze
screen.
(15) [Monitor settings] button
Displays the monitor screen.
(16) [Sensor Image Memory] button
Displays the Sensor Image Memory screen.
(17) [USB memory] button
Displays the USB memory screen.
(18) [Sensor setup] button
Stops the running mode and displays the Sensor setup menu
screen.
462GB
(8) (9)
(1)
(2)
(3)
(4)
(5)
(6)
(10)
(11)
(1)
(2)
(3)
(4)
(5)
(7)
(8) (9)
(10)
(11)
(12)
(13)
(14)
(18) (17) (16) (15)
Status OK (green) Status NG (red)
Threshold Matching rate