KEYENCE IV Series - Manual (Page 2)

2
Operation for initial start-up
1. Turn on the power of the monitor.
2. Select the language.
3. Set the current date and time.
4. Select [direct connection].
5. Turn on the power of the sensor.
6. Touch the [OK] button.
7. Select the output polarity of the sensor.
8. The sensor setup screen will be displayed.
Basic setting
 Starting the Navigator
1. Touch the [Sensor setup] button.
2. Touch the [Start] button.
 Setting the Image Optimization
1. Touch the [Trigger Options] button.
2. Select the Trigger type.
[Internal trigger]: The trigger will be input automatically, according
to the trigger interval settings.
[External trigger]: The trigger will be input when an external signal
is input. If necessary, set the trigger delay.