KEYENCE SR-750 Series User Manual
KEYENCE Sensors
1
SR-750_AFM_E
Fixed Mount 2D Code Reader
SR-750 Series
Additional Functions
Manual
Symbols
This user's manual uses the following symbols that alert you to important
messages. Be sure to read these messages carefully.
Important
Cautions as to operation that is always performed are shown.
Point
Cautions as to operation that can be easily performed incorrectly
are shown.
Reference
Matters that will help the user improve understanding of the text and
useful information are shown.
The items and pages to be referred to in this document are shown.
Introduction
This manual describes the additional functions included in the "SR-750 Series 2D
Code Reader". Before operating, please read this manual thoroughly so that you
can completely understand and utilize the additional functions of the SR-750
Series.
Keep this manual handy along with the "SR-750 Series User's Manual" for quick
future reference.
Table of Contents
1 Details of Additional Functions................................................................... 1
2 Details of Additional Symbols..................................................................... 1
3 Details of Japanese Pharmaceutical Code Quality
Verification Function................................................................................... 3
4 Modifications to AutoID Network Navigator................................................ 5
5 Modified and Added Configuration Commands ......................................... 6
6 Other Modifications .................................................................................... 7
7 Precautions ................................................................................................ 7
DANGER
It indicates a hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING
It indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
It indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE
It indicates a situation which, if not avoided, could result in product
damage as well as property damage.
352GB
1 Details of Additional Functions
The SR-750 Series incorporates the following additional functions since Ver1.2.
Expansion of read code types
It is now possible to read the following code types.
List of newly supported code types
• PDF417
• MicroPDF417
• Composite Code (CC-A, CC-B, CC-C)
• CODE93
• 2of5 (Industrial 2of5)
• COOP 2of5
• Trioptic CODE39
[List of conventionally supported code types]
• QR
• MicroQR
• DataMatrix(ECC200)
• GS1 DataMatrix
• GS1 DataBar
• CODE39
• CODE39 FullASCII
• ITF
• NW-7(Codabar)
• CODE128
• GS1-128
• JAN/EAN/UPC
For detailed setting of new code types, refer to
Print quality control of code symbols printed on
Japanese pharmaceuticals
The system supports the "Japanese Pharmaceutical Code quality verification
function" to enable the print quality control of code symbols printed on Japanese
pharmaceuticals recommended by the New Guideline for Barcode Labeling on
Prescription Drugs" issued in 2012.
For pharmaceuticals, the printable area of code symbols tends to be reduced due
to the product properties. Therefore, the composite symbols or similar are used,
which can be printed on a reduced space.
Since the printable area is limited, a low print quality of code symbols can cause
such field symptoms as the failure to read codes with the general-purpose barcode
reader (2D code reader) .
To prevent such risks, the print quality control of code symbols has been
recommended.
The "Japanese Pharmaceutical Code quality verification function" of the SR-750
Series can perform the code quality verification while maintaining the conventional
high reading performance.
This allows for the code reading and code quality qualification when transporting
the products.
For the "Japanese Pharmaceutical Code quality verification function", refer to
"3 Details of Japanese Pharmaceutical Code Quality Verification Function"
2 Details of Additional Symbols
Number of digits read
* Since Trioptic CODE39 is an extended function of CODE39, the number of digits read
is 3 to 50, equal to that of CODE39.
Symbology
Maximum digits
Minimum digits
PDF417, MicroPDF
2710
1
CC-A/B(GS1 DataBar)
338
1
CC-A/B(EAN/UPC)
338
1
CC-A/B/C(GS1-128)
2361
1
CODE93
50
1
2of5 (Industrial 2of5)
50
1
COOP 2of5
50
2