Specifications, Warranties and disclaimers – KEYENCE BL-600 Series User Manual

Page 6

Advertising
background image

6

SPECIFICATIONS

General specifications

1. Reading bar width indicates the range of readable narrow bar width when the bar code type is CODE39.
2. Maximum reading label width includes the bar code margin (quiet zone).
3. When start/stop character of CODE128 is CODE-C, up to 64 digits are allowed.
Note: The internal BL settings are written to the built-in EEPROM (erasable up to 100000 times).

Model

BL-600

BL-601

BL-600HA

BL-601HA

BL-650HA

BL-651HA

Type

Standard type

High-resolution

High-resolution, side-scanning type

Scanning direction

Front

Side

Light source

Semiconductor laser

(Wavelength: 650 nm)

Laser

Class

FDA (CDRH) Part

1040.10

Class II Laser Product (Pulse duration:56

μ

s, Output:1.5mW)

IEC 60825-1

Class 2 Laser Product (Pulse duration:112

μ

s, Output:85

μ

W)

Scan method

Single

Raster

Single

Raster

Single

Raster

Reading distance

75 to 330 mm

(When narrow width is 1.0 mm)

55 to 190 mm

(When narrow width is 0.5 mm)

45 to 175 mm

(When narrow width is 0.5 mm)

Reading bar width

1.

0.19 to 1.0 mm

* 0.25 to 1.0 mm for CODE93 and CODE128

0.125 to 1.0 mm

* 0.15 to 1.0 mm for CODE93 and CODE128

Maximum reading label

width

2.

250 mm

(When reading distance is 280 mm)

156 mm

(When reading distance is 174 mm)

170 mm

(When reading distance is 155 mm)

PCS

0.6 or more (white reflection rate 75% or more)

Scan count

500 scans/second

Supported codes

CODE39, ITF, Industrial2of5, COOP2of5, Coda bar CODE128, GS1-128, CODE93, EAN / UPC(A•E)

Reading digit

32 digits max.

3.

Enclosure rating

IP65

Ambient light

Sunlight: 10000 lx

Incandescent lamp: 6000 lx

Ambient temperature

0 to 45°C

Relative humidity

35 to 85%

Operating atmosphere

No dust or corrosive gas present

Vibration

10 to 55 Hz, amplitude 1.5 mm, 2 hours each in X, Y and Z directions.

Power supply voltage

5 V DC ±5%

Power consumption

330 mA max.

Weight

Approx. 115 g

Approx. 130g

Interface specifications

Raster width specification

In raster scan mode, the BL-600 scans multiple positions of the bar code by swinging the laser

beams up and down. Thus, the bar code can be read even if it has a stain or missing part.

For the up-down width of raster scan (raster width), see the table below.

Warranties and Disclaimers

(1) KEYENCE warrants the Products to be free of defects in materials and workmanship for a

period of one (1) year from the date of shipment. If any models or samples were shown to

Buyer, such models or samples were used merely to illustrate the general type and quality of

the Products and not to represent that the Products would necessarily conform to said

models or samples. Any Products found to be defective must be shipped to KEYENCE with

all shipping costs paid by Buyer or offered to KEYENCE for inspection and examination.

Upon examination by KEYENCE, KEYENCE, at its sole option, will refund the purchase price

of, or repair or replace at no charge any Products found to be defective. This warranty does

not apply to any defects resulting from any action of Buyer, including but not limited to

improper installation, improper interfacing, improper repair, unauthorized modification,

misapplication and mishandling, such as exposure to excessive current, heat, coldness,

moisture, vibration or outdoors air. Components which wear are not warranted.

(2) KEYENCE is pleased to offer suggestions on the use of its various Products. They are only

suggestions, and it is Buyer's responsibility to ascertain the fitness of the Products for

Buyer’s intended use. KEYENCE will not be responsible for any damages that may result

from the use of the Products.

(3) The Products and any samples ("Products/Samples") supplied to Buyer are not to be used

internally in humans, for human transportation, as safety devices or fail-safe systems, unless

their written specifications state otherwise. Should any Products/Samples be used in such a

manner or misused in any way, KEYENCE assumes no responsibility, and additionally Buyer

will indemnify KEYENCE and hold KEYENCE harmless from any liability or damage

whatsoever arising out of any misuse of the Products/Samples.

(4) OTHER THAN AS STATED HEREIN, THE PRODUCTS/SAMPLES ARE PROVIDED WITH

NO OTHER WARRANTIES WHATSOEVER. ALL EXPRESS, IMPLIED, AND STATUTORY

WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-

INFRINGEMENT OF PROPRIETARY RIGHTS, ARE EXPRESSLY DISCLAIMED.

IN NO EVENT SHALL KEYENCE AND ITS AFFILIATED ENTITIES BE LIABLE TO ANY

PERSON OR ENTITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL

OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, ANY DAMAGES

RESULTING FROM LOSS OF USE, BUSINESS INTERRUPTION, LOSS OF

INFORMATION, LOSS OR INACCURACY OF DATA, LOSS OF PROFITS, LOSS OF

SAVINGS, THE COST OF PROCUREMENT OF SUBSTITUTED GOODS, SERVICES OR

TECHNOLOGIES, OR FOR ANY MATTER ARISING OUT OF OR IN CONNECTION WITH

THE USE OR INABILITY TO USE THE PRODUCTS, EVEN IF KEYENCE OR ONE OF ITS

AFFILIATED ENTITIES WAS ADVISED OF A POSSIBLE THIRD PARTY’S CLAIM FOR

DAMAGES OR ANY OTHER CLAIM AGAINST BUYER. In some jurisdictions, some of the

foregoing warranty disclaimers or damage limitations may not apply.

BUYER'S TRANSFER OBLIGATIONS:

If the Products/Samples purchased by Buyer are to be resold or delivered to a third party, Buyer

must provide such third party with a copy of this document, all specifications, manuals,

catalogs, leaflets and written information provided to Buyer pertaining to the Products/Samples.

E 1101-3

Trigger input

Non-voltage input (relay contact, solid state)

* TTL input is also available.

OK/NG

output

Output type

NPN open collector

Rating load

24 V DC, 30 mA

Leakage current at OFF

0.1 mA max.

Residual voltage at ON

0.5 V max.

Serial

interface

Applied standard

In accordance with RS-232C

Synchronization

Start-stop synchronization

Transmission code

ASCII code

Baud rate

600, 1200, 2400, 4800, 9600, 19200, 31250,

38400 bps

Data length

7/8 bit

Parity check

None/even/odd

Stop bit length

1/2 bit

Model

Reading distance

Raster width

BL-601

120 mm

7.1±1.8 mm

BL-601HA

90 mm

5.5±1.4 mm

BL-651HA

65 mm

5.5±1.4 mm

Copyright (c) 2013 KEYENCE CORPORATION. All rights reserved.

12617E 1063-1 96M12617 Printed in Japan

Advertising