Panasonic NVDS5EG User Manual

Page 116

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

DEUTSCH

ENGLISH

• Wenn die Kühlfunktion des Video-Druekers

eingeschaltet wird und sich die Druckgeschwindigkeit

verlangsamt, kann der automatische Druckvorgang

dadurch u.U. gestoppt werden, ln diesem Fall

[AUTOPRINT] erneut auf [ON] einstellen.

• Beim Auswechseln der Farbfolien-Cassette oder des

Papiers während des Druckvorgangs kann das gleiche

Bild u.U. zweimal gedruckt werden.

• Wenn mehrere Standbilder nacheinander im

Photoshot-Modus aufgenommen werden, können

einige Bilder beim Drucken u.U. übersprungen werden.

• Vor dem Eingeben eines Bildes in den Speicher des

Druckers die Taste [OSD] 54) auf der

Fernbedienung des Camerarecorders drücken, damit

keine Anzeigen im Bild eingeblendet sind. Ansonsten

werden die Zählwerk-Anzeige und andere

Funktionsanzeige im Bild eingeblendet gedruckt.

• In den folgenden Fällen können bei der Benutzung der

automatischen Druckfunktion u.U. einige Bilder

ausgelassen werden.

• Wenn Sie Standbilder drucken, die auf dem

Camerarecorder einer anderen Marke im Photoshot-

Modus aufgezeichnet worden sind.

• Wenn Sie zwischen dem Aufzeichnen von zwei

Standbildern Im Photoshot-Modus den

Camerarecorder mehrmals (dreimal oder mehr) ein

und wieder ausschalten.

• Wenn Sie ein Standbild im Photoshot-Modus auf

einer Bandstelle aufzeichnen, an welcher vorher
bereits ein PhotoshotrStandbild aufgezeichnet wurde.

• Wenn Sie zwischen dem Aufnehmen von zwei

Standbiidern im Photoshot-Modus eine andere

Aufnahmegeschwindigkeit (SP/LP) wählen.

• Beim ersten zu druckenden Photoshot-Standbild.

• When the cooling function of the Video Printer is

activated and the printing speed siows down, the
automatic printing may stop. In this case, set
[AUTOPRINT] to [ON] again.

• If you replace the ink cassette or paper during printing,

the same picture may be printed twice.

• If still pictures are recorded successively in the

Photoshot Mode, some pictures may be skipped during
printing.

• Before storing an image in memory on the Video

Printer, press the [OSD] Button (->

54)

on the Remote

Controller of the Movie Camera so that no indications
appear in the picture. Otherwise, the Counter Indication
and other function indications are also printed in the
picture.

• In the following cases, some pictures may be skipped

when printing by using the Auto Print Function.

• When you print still pictures recorded in the

Photoshot Mode on the video camera of another

brand.

• If you turn the Movie Camera on and several times

(3 times or more) between recording two still pictures
in the Photoshot Mode.

• When you record a still picture in the Photoshot Mode

on the same part of a cassette where a photoshot

picture was recorded before.

• When you selected a different recording speed

(SP/LP) between the recording two still picture in the
Photoshot Mode.

• At the first Photoshot Picture to be printed.

-116-

Advertising